What are the inspection standards for hats?

Views: 77     Author: Site Editor     Publish Time: 2022-11-30      Origin: Site

There are many people who wear a favorite hat for shade in summer or warmth in winter. Not only the shape is more beautiful, but also very practical. In real life, there are all kinds of hats: baseball hats, basin hats, casual hats, tennis hats, cowboy hats, children's hats, fashion hats, winter hats, knitting hats and so on. So how should these hats be inspected? What are the inspection standards for hats? Let me tell you.

I. Cap type inspection (appearance) :

1. Cap type should be consistent with the sample, cap body around the same height, cap body around the symmetry, cap eyebrow (bill, brim) centered, correct, appropriate bend.

2, the cap under the mouth straight (especially the cap eyebrow corner). The lining part of the cap body shall not be bulging, degumming, gluing, wrinkling and other phenomena.

3. The front piece is full and wrinkle-free without concave waist phenomenon. The top of the hat needs to meet at one point, not sharp corners, can not have chrysanthemum top phenomenon (six-piece hat, octagonal hat, etc.).

4, cap top and cap wall splicing natural tightness suitable for no details of the edges and corners (except for part of the cap type), double needle wrinkle-free (basin cap, military cap, etc.).

5. If there is embroidery printing, the pattern size, shape and color of embroidery printing should be consistent with the confirmed sample. Embroidery no bare bottom, broken line phenomenon, front and back of the thread to deal with clean. Printing should be colorless, smooth, no cracking phenomenon (except cracked printing).

6. The material, color and collocation of the fabric shall be consistent with the confirmed sample. And no color difference, cloth defects, stains phenomenon.

7. Cover seam, sweat belt, cap knob, main label, washing label, etc. must be consistent with the confirmed sample.

2. Sewing and process inspection:

1. Stitch spacing must be kept between 3cm/10-12 stitches;

2, cap generally have sweat belt, sweat belt in the non-woven paper there are 70g and 85g two, the color is generally required to be white, can not yellow;

3, the sealing of the child and mother tape is generally outside the mouth;

4, sweat belt must be worn flat; Do not crack, especially the tongue part, the pin code of the tongue pulling part should not be too large;

5, the top button has three angles and two angles, generally using three angles more, generally can withstand at least 15 pounds of tension;

6. Rust eyes must be worn, and the color is generally consistent with the main color of the hat;

7. The middle part of the hat is usually embroidered and PVC marked; Its position requirements are generally 2cm-2.5cm on the lower mouth, both sides are centered, if it is embroidery, the color must meet the requirements and no thread can be left, if it is PVC standard, the size must meet the requirements, and can not appear warp edge, defects and other phenomena.

8. When ironing, the stitching part shall be flat, the temperature is generally required to be 105-110 degrees, and the time is generally 7s-8s.

9. The ring diameter of the hat must be correct;

10, on the visor, its position must be in the center, can not skew.

11. The corners of Velcro are generally trimmed into rounded corners.

Iii. Packaging Inspection:

1. After ironing, the shape of the cap shall be completely consistent with the confirmed sample. The seam of the cap and cover shall not be wrinkled, and the hat shall be hard lined.

2. The pressure of shaping the hat, especially the papyrus hat, should be moderate when ironing, and the hat body should not be flattened by papyrus.

3, the ironing temperature should be appropriate, there should be no aurora, (especially polyester fabric) hot yellow phenomenon. Main label, wash label should be plain clothes, no wrinkles, ironing phenomenon.

4, the quality certificate, price tag hanging method, position should be consistent with the order requirements. The quantity and ratio of each carton should be consistent with the packing list